ALL REQUESTED INFORMATION MUST BE FILLED IN TO ENSURE AN ACCURATE QUOTATION
Company: Contact:
Location:
E-mail address:
Analyzer Type and Detection Method (ie. CO NDIR analyzer)
Source of Sample Ambient Air Coal-fired Power Plant Diesel Emissions Incinerator Natural Gas Refinery SCR Wastewater plant Other
Area Classification General Purpose Class I, Division II Class I, Division I
Installation Location Analyzer shed Stack mounted At stack on catwalk or rail Not decided yet
Will you be using a heated sample line? Yes No Not sure
Is -40°C Dew point instrument Air Available? Yes No Not sure
Sampling System Inlet Conditions: Gas Sample Stream Composition:
Flow (l/min):
NOx ppm:
HCl ppm:
Pressure (in. H2O):
O2 %:
SO2 ppm:
Temperature (°C):
CO2 %:
SO3 ppm:
H2O (% by volume):
CO ppm:
NH3 ppm:
Check box of compound if monitoring
NOx
SOx
O2
NH3
HCl
Alcohols
Ketones
Sample Outlet Dew Point Required: 0 to 5 degrees C -5 to 0 degrees C -10 to -5 degrees C -10 to -15 degrees C less than -15 degrees C
Other information
If probe mounted system is to be quoted, please provide the following information
Stack Diameter
Flange Diameter No current flange 2 inch 3 inch 4 inch
Probe Filter Blowback Yes No Quote as an option
Perma Pure LLC © 2006 | All Rights Reserved
