Mini-GASS Sampling Systems
Mini-GASS™ systems prepare hot gas sample
streams
for high performance gas analysis. Our most popular systems, Mini-GASS
units remove particles, acid mists, and water vapor from a gas stream
without the loss of analytes.
Many gas analyzers suffer performance
degradation and maintenance problems due to clogging and corrosion when
water or water vapor reaches the equipment. Mini-GASS systems remove
water to well below the condensation point, typically providing dew
points as low as -25C.
Mini-GASS units offer several options and
configurations, including mounting directly on the stack so very little
heated line is used. For explosive environments, a Class I, Division II
version is available. An automatic drain installed on the filter will
remove acid mists. A sample pump can be incorporated to make a
completely self-contained system.
Mini-GASS systems are ideal for process
and continuous emissions monitoring (CEMS) applications. They are
designed to process highly corrosive and difficult samples including gas
streams containing high levels of HCl, HF, NOx or SOx.
|
Mini-GASS Model |
 Certain
links
below require dwf viewer. Click Autodesk icon to download |
 |
MG-1220
Basic Mini-GASS system with
sample filter, Nafion dryer, temperature and purge controls.
|
 |
MG-1228
Most common Mini-GASS system
which incorporates sample filter, Nafion dryer, temperature
and purge controls, safety interlocks and optional heatless
dryer.
|
 |
MG-1228 Probe
Probe mounted Mini-GASS
system incorporates all the features of the std MG-1228
along with a heated probe filter, heated blowback and probe
in a NEMA 4X fiberglass enclosure.
|
|
|
MG-1235
The MG-1235 with the extended
bottom compartment is used for systems which require a
sample pump as well as a heatless dryer.
|
 |
MG-2812
A portable sampling system
designed for stack testing and intermittent use. Includes
carrying case.
|
 |
MG-1640 (This unit has been
replaced by the GS-2040)
The MG-1640 probe mounted
system is a larger all stainless steel enclosure for rugged
applications.
|
|
