Perma Pure’s Nafion™ Polymer is often referred the wonder material for its unique ability to transfer moisture from one side of the membrane to the other. This transfer occurs as a first order kinetic reaction making it highly selective and ideal for analysis applications, where moisture needs to be removed without analyte loss.
What is Nafion™ Polymer
The Nafion™ polymer was invented by Walther Groth in late 1960s. Nafion™ polymer is a copolymer of perfluoro-3,6-dioxa-4-methyl-7octene-sulfonic acid and tetrafluoroethylene (Teflon®). In simpler terms Nafion™ polymer is a Teflon® backbone with occasional side chains of another fluorocarbon. The side chain terminates in a sulfonic acid (-SO3H).
Chemical Formula for Nafion™ Polymer
Apart from the sulfonic acid group, the Nafion™ polymer is a fluorocarbon. Like most fluoropolymers, it is extremely resistant to chemical attack (corrosion resistant). The sulfonic acid group is immobilized within the bulk fluorocarbon matrix and cannot be removed, but unlike the fluorocarbon matrix the sulfonic acid groups do participate in chemical reactions. The presence of the sulfonic acid adds three important properties to Nafion polymer:
- Nafion™ polymer functions as an acid catalyst due to the strongly acid properties of the sulfonic acid group.
- Nafion™ polymer functions as an ion exchange resin when exposed to solutions.
- Nafion™ polymer very readily absorbs water, from the vapor phase or from the liquid phase. Each sulfonic acid group will absorb up to 13 molecules of water. The sulfonic acid groups form ionic channels through the bulk hydrophobic polymer, and water is very readily transported through these channels. Nafion™ polymer functions like a very selective, semi-permeable membrane to water vapor.
The physical properties of Nafion™ polymer are similar to those of other fluoropolymers. It is translucent plastic. When used as an ion exchange membrane, it operates at temperatures up to 190°C. When used as a dryer, it can operate up to 150°C. The burst pressure of Nafion™ tubing is generally greater than 200 psig (over 13 bar) but it varies with the diameter and wall thickness. An unusual property of Nafion™ polymer is its propensity to change in physical size. As Nafion™ polymer absorbs water, it swells by up to 22%. When exposed to alcohols it increases in size by up to 88%.
How Nafion™ Polymer Works
The Nafion™ polymer transfers water molecules from one side of the membrane to the other by a first order kinetic reaction. This is unlike a porous membrane that depends on the physical size of molecules. Nafion™ Polymer selectivity is based on chemical reactivity, not the size of the molecule – therefore, not traditional permeation. The Nafion™ polymer selectively transfers water vapors, leaving most analytes in the gas stream untouched.
The driving force for the Nafion™ polymer to transfer water molecules is the difference in humidity levels on either side of its membrane. The Nafion™ polymer tries to attain equilibrium of the partial pressure of water vapor on either side of its membrane.
Nafion™ Polymer Permeability
|Removed by Nafion™ Polymer|
|Organics||Alcohols, DMSO, THF|
|Organics||Acids, Aldehydes, Amines, Ketones, Nitriles|
Nafion™ Polymer Im-Permeability
|Totally Retained in Sample|
|Atmospheric Gases||Ar, He, H2, N2, O2, O3|
|Halogens||Br2, Cl2, F2, l2|
|Hydrocarbons||Simple Forms (Alkanes)|
|Inorganic Acids||AHCL, HF, HNO3, H2SO4|
|Other Organics||Aromatics, Esters, Ethers|
|Oxides||CO, CO2, SOX, NOX|
|Sulfur||COS, H2S, Mercaptans|
|Toxic Gases||COCL2, HCN, NOCl|
Gas Permeability of Nafion™ Polymer and Water
We are often asked about the relative selectivity of water in Nafion™ polymer relative to common gasses. Please see the graph for the relative gas permeability of water through Nafion polymer versus some common gases. As you can see, Nafion polymer is very effective at transporting only water while keeping the other gasses separated.
For example, for H2S and CO2, water has a 1000 to 1 affinity and O2 and N2 a 1,000,000 to 1
Nafion™ Polymer’s Antibacterial Properties
Respiratory treatment and respiratory monitoring may lead to several complications. You need to deal with the possibilities of hospital acquired pneumonia and other infections.
Aside from its Biocompatibility properties, we tested Nafion™ tubing’s ability to prevent contamination from passing through the material in a humidification setting. You will be glad to know that Nafion™ polymer shows great promise in preventing bacterial contamination. We recreated a humidification test by placing the Nafion tubing in a water bath contaminated with Pseudomonas aeruginosa and Staphylococus aureus and passed dry, clean air through the tube. No detectable bacteria was found in the outlet after 24 hours. It was demonstrated that Nafion™ tubing acts as a barrier and will not transfer bacteria across the membrane. These results have shown promise for our tubing to be used in clinical setting without running the risk of contaminating any analytes, be it patient breath, or humidified medical gases that may be sent to a patient.
To Learn more, please visit our Blog
Talk to Our Team
Speak with our team and learn more about working together. Find Your Solution
Sign Up for Newsletter