Baldwin iCool Series OEM Thermoelectric Cooler
Accurate analysis of combustion samples and process control streams requires a method to remove the moisture from the sample without removing the gas components of interest. The new Integrator Series Thermo -Electric Cooler is an ideal way to decrease the moisture content of sample gases to a repeatable, stable dew point of 4°C (39°F). The Integrator Series line of coolers eliminate water interference during sensitive measurements and prevent water condensation in filters, pumps and sample lines. Most importantly, these coolers protect valuable analyzers from damage due to entrained water
droplets.
Features:

• 1-4 lpm (2.2 – 6.4 scfh); 58 Btu/Hr; based on 12% water at inlet
• Single or dual channel system
• (1) 5″ active impinger (select material below) plus 5″ optional passive impinger
• LCD display for temperature and setpoint
• LED displays for “ready” or “fail”
• 90-240 VAC, 50/60 Hz, auto-sensing
• 7.25″ x 8.25″ x 10.25″ (18.5 cm x 21 cm x 26.7 cm); 11 lbs
• Not suitable for high ambient temperature applications; Must be mounted in air conditioned enclosure
• Single or dual head peristaltic drain pump required but not included

iCool Series Cooler Specifications