Baldwin e5900XP eCool Series Explosion-proof Thermoelectric Coolers
Features:

  • 10-20 lpm (21.2-42.4scfh); 1200 Btu/Hr
  • CSA Approved Class 1, Division 2, Groups A, B, C, & D; CSA FILE# 226484-1580461
  • Dual channel system
  • (2) active & (2) passive impingers, 10″ long in parallel/split stream only
  • Temperature display
  • 115 VAC 50/60 Hz voltages
  • 14″ x 13″ x 13″, 39 lbs
  • Dual head peristaltic drain pump required but not included
  • Water slip and temperature alarm relay

e5900XP Series Cooler Intelligent Product Numbering System

part-numbers-baldwin-e5900xp-Series

1 – Voltage
115 VAC, 50/60 Hz 1A
2 – Impingers (Required Option)
(4) 10″ Stainless Steel, EZ Clean Twist-Apart Impingers ES
(4) 10″ Glass Impingers, threaded with fittings G
(4) 10″ Kynar Impingers K
(4) 10″ Stainless-Durinert coated, EZ Clean Twist-Apart Impingers ED
3 – NJ Thermocouple
Stainless Steel Impingers Only
(2) K-type NJ thermocouple temperature sensor, parallel configuration KP
4 – LAN card installed
Ethernet (LAN) board, Modbus over TCP/IP E
5 – Accessory control board
Controls probe and heated line 1
6 – Water Slip Sensor
(2) Water slip sensor with inline flow holder; 1/4″ Kynar tube fittings WP

Baldwin e5900XP Series Cooler Recommended Accessories

ITEM # Description
3KPB-003XP Peristaltic pump, dual head, 115 VAC, complete with enclosure, CSA Approved

Baldwin e5900XP Series Cooler Spare Parts

ITEM # Description
3KPB-000 Pump Peristaltic, No Heads
2PBM-003 Peristaltic pump, head only, standard
2PBT-002PK Peristaltic pump, tubing, norprene, size 17 (10 feet)
2PBM-006 Dual head hardware kit
3CXD-022 Impinger, 10″ EZ-Clean twist-apart, SS Durinert+ coated
3CXG-002 Impinger, 10″ glass, threaded with fittings
3CXK-003 Impinger, 10″ Kynar
3CXS-022 Impinger, 10″ SS, EZ-Clean twist-apart
0PTC-003 Paste,Thermal,Compound,2 Oz.Tube
3CCB-022 Circuit board, eCOOL 5000, control board
3CCB-023 Circuit board, eCOOL, relay board
3CCB-024 Circuit board, eCOOL, LAN card
3CCB-025 Circuit board, eCOOL, accessory board
3CCB-026 Circuit board, eCOOL, isolator board
1PSD-028 Power supply, 300 W, 24VDC, 12A, Class 1, Div 2
1TTC-003 Thermocouple, type K, 36″
2FAN-005 Fan, muffin, 4″ x 1″, 12VDC
2FAN-026 Fan, muffin, 4″ x 1″, 24VDC
2FAN-007 Fan, muffin, 6″ x 1-1/2″, 120VAC
2FAN-008 Fan, muffin, 6″ x 1-1/2″, 230VAC
3KPE-004 Peltier element kit, 40 mm, single TE
3CWS-001 Water slip sensor only with 18″ lead and male connector
3KCW-002 Water Slip Sensor w/conn.
4C-NJ/K NJ Thermocouple Retrofit; for 1 Impinger