Baldwin iCool Series OEM Thermoelectric Cooler
Accurate analysis of combustion samples and process control streams requires a method to remove the moisture from the sample without removing the gas components of interest. The new Integrator Series Thermo -Electric Cooler is an ideal way to decrease the moisture content of sample gases to a repeatable, stable dew point of 4°C (39°F). The Integrator Series line of coolers eliminate water interference during sensitive measurements and prevent water condensation in filters, pumps and sample lines. Most importantly, these coolers protect valuable analyzers from damage due to entrained water

  • 1-4 lpm (2.2 – 6.4 scfh); 58 Btu/Hr; based on 12% water at inlet
  • Single or dual channel system
  • (1) 5″ active impinger (select material below) plus 5″ optional passive impinger
  • LCD display for temperature and setpoint
  • LED displays for “ready” or “fail”
  • 90-240 VAC, 50/60 Hz, auto-sensing
  • 7.25″ x 8.25″ x 10.25″ (18.5 cm x 21 cm x 26.7 cm); 11 lbs
  • Not suitable for high ambient temperature applications; Must be mounted in air conditioned enclosure
  • Single or dual head peristaltic drain pump required but not included

iCool Series Cooler Specifications

Sample Gas Flow Range 1-3 LPM (2.1- 6.4 SCFM)
Inlet Condition at Rated Flow 150°C (300°F) @ 12% H20, 2.5 LPM
Outlet Dew Point at Rated Flow 4°C (39.2°F)
Maximum Inlet Temperature 15 lbs – 6.8 kg
Maximum Inlet Pressure 200°C (392°F) SS, Durinert, Glass 138°C (280°F) Kynar
Ambient Temperature Range 45 psig – 3 bar / 2250 mmHg
Power Supply 33-104°F – 0.6-40°C
Dimensions 18.5 x 21 x 26.7 cm HWD 7.25 x 8.25 x 10.5 in.
Weight 5 kg (11 lbs)

iCool Cooler Intelligent Product Numbering System


1 – AC Power
AC Powered Auto Sensing 90-240 VAC A
2 – Impinger Count
1 active impinger, 1-2 lpm based on 12% water at inlet 1
1 active impinger, 1 passive impinger, 3-4 lpm on 12% water at inlet 0
3 – Impinger Type
5″ Stainless Steel, EZ Clean Twist-Apart Impinger ES
5″ Glass Impinger, threaded with fittings G
5″ Kynar Impinger K
5″ Stainless-Durinert coated, EZ Clean Twist-Apart Impinger ED

iCool Series Cooler Recommended Accessories

ITEM # Description
3KPB-001 Peristaltic pump, single head, 115 VAC, complete with enclosure
3KPB-002 Peristaltic pump, single head, 230 VAC, complete with enclosure
3KPB-003 Peristaltic pump, dual head, 115 VAC, complete with enclosure
3KPB-004 Peristaltic pump, dual head, 230 VAC, complete with enclosure

iCool Series Cooler Spare Parts

ITEM # Description
3KPB-000 Pump Peristaltic, No Heads
2PBM-001 Peristaltic pump, motor only, 115 VAC 60 Hz
2PBM-002 Peristaltic pump, motor only, 230 VAC 50 Hz
2PBM-003 Peristaltic pump, head only, standard
2PBT-002PK Peristaltic pump, tubing, norprene, size 17 (10 feet)
3CXD-023 Impinger, 5″ EZ-Clean twist-apart, SS Durinert+ coated
3CXD-025 Impinger, 5″ NJ, EZ-Clean twist-apart, SS Durinert+ coated
3CXG-001 Impinger, 5″ glass, threaded with fittings
3CXK-001 Impinger, 5″ Kynar
3CXS-023 Impinger, 5″ SS, EZ-Clean twist-apart
3CXS-025 Impinger, 5″ NJ, EZ-Clean twist-apart, SS
3CCB-050 Control board, single channel
102558 Power supply; 100W, 12VDC
1TTC-025 Thermister probe
2FAN-004 Fan, muffin, 4″ x 1-1/2″, 12VDC
3KPE-004 Peltier element kit, 40 mm, single TE
3KCW-007 Water Slip Sensor,Assembly, Wire leads only
4C-NJ/K NJ Thermocouple Retrofit; for 1 Impinger