MiniGASS 1228P Probe Gas Sampling System

mg-1228-probe

Further Information:

Mini-GASS™ systems prepare hot gas sample streams for high performance gas analysis.

  • 12″w x 28″h x 7″d fiberglass enclosure w/transparent cover
  • 1/4″  inlet compression fitting
  • Heat-shrinkable conduit for heated sample line inlet
  • PID temperature controller with digital display
  • Purge gas flowmeter, pressure regulator and pressure gage
  • System ready/alarm outputs
  • Corrosion-resistant coalescing filter, 2.5″ diameter housing with borosilicate glass shell; filter element of borosilicate fiber in Teflon™ binder with 1 µm absolute porosity
  • Rated NEMA/ Type 4X
  • CE Mark approved

MG-1228P Probe mounted Mini-GASS system incorporates all the features of the std MG-1228 along with a heated probe filter, heated blowback and probe in a NEMA 4X fiberglass enclosure.part-numbers-mg-1228p-series

1 – Voltage
115 VAC, 50/60 Hz 1A
230 VAC, 50 Hz 2A
2 – Wetted Material / Inlet Type
Fluorocarbon F
Stainless Steel S
3 – Filter Drain
Manual drain valve assembly, for vacuum drain, includes a Teflon eductor with 0.040″ Teflon nozzle and a Polypropylene check valve to prevent backflow V
Manual drain valve assembly, for pressure drain (not available in Kynar), includes a Toggle valve to manually drain coalesced liquids P
4 – Dryer (Required Option)
50 tube Nafion™ gas dryer, 24″ long, Small dryer for LOW sample flow rates (1 lpm or less) 05
100 tube Nafion™ gas dryer, 24″ long; Medium dryer for MODERATE sample flow rates (2-3 lpm) 10
200 tube Nafion™ gas dryer, 24″ long; Large dryer for HIGH sample flow rates (4-6 lpm) 20
5 – Purge Air Dryer or Sample Pump
Heatless dryer for purge air; req’d when instrument air is unavailable HD
6 – Filter Element Type
10 micron sintered stainless steel SS
2 micron, 316L stainless steel screen mesh M2
5 micron sintered stainless steel 5
20 micron sintered stainless steel 20
2 micron ceramic C1
0.1 micron glass C2
0.7 micron glass / TFE coated C7
2 micron Teflon T2
7 – Flange
2″, 150# with gasket & bolts 2
Gas cooling spool piece: w/2″ flanges & 6″ spool 2A
Gas cooling spool piece: w/2″ flanges & 12″ spool 2B
3″, 150# with gasket & bolts 3
Gas cooling spool piece: w/3″ flanges & 6″ spool 3A
Gas cooling spool piece: w/3″ flanges & 12″ spool 3B
4″, 150# with gasket & bolts 4
Gas cooling spool piece: w/4″ flanges & 6″ spool 4A
Gas cooling spool piece: w/4″ flanges & 12″ spool 4B
6″, 150# with gasket & bolts 6

Perma Pure MiniGASS 1228P Probe System Recommended Accessories

ITEM # Description
4P-STG4 18″, 316L stainless steel, 1/2″, schedule 40
4P-STG4-2 2-foot, 316L stainless steel, 1/2″, schedule 40
4P-STG4-3 3-foot, 316L stainless steel, 1/2″, schedule 40
4P-STG4-4 4-foot, 316L stainless steel, 1/2″, schedule 40
4P-STG4-5 5-foot, 316L stainless steel, 1/2″, schedule 40
4P-STG8 18″, 316L stainless steel, 1/2″, schedule 80
4P-STG8-2 2-foot, 316L stainless steel, 1/2″, schedule 80
4P-STG8-3 3-foot, 316L stainless steel, 1/2″, schedule 80
4P-STG8-4 4-foot, 316L stainless steel, 1/2″, schedule 80
4P-STG8-5 5-foot, 316L stainless steel, 1/2″, schedule 80
4P-STGH 18″, Hastelloy C276, 1/2″, schedule 80
4P-STGH-2 2-foot, Hastelloy C276, 1/2″, schedule 80
4P-STGH-3 3-foot, Hastelloy C276, 1/2″, schedule 80
4P-STGH-4 4-foot, Hastelloy C276, 1/2″, schedule 80
4P-STGH-5 5-foot, Hastelloy C276, 1/2″, schedule 80

Perma Pure MiniGASS 1228P Probe System Spare Parts

ITEM # Description
MG-DTC Digital temperature controller, single channel
MG-TCS Thermocouple
MG-SSR Solid state relay
MG-FM Flow meter, purge gas (0-60 L/min)
MG-PR Pressure regulator, purge gas or eductor
MG-DPS Differential pressure switch
MG-PG-0-30 Pressure gage, purge gas (0-30 PSI)
MG-VG-0-60 Vacuum gage, purge eductor (0-30″Hg)
SV-K10 Safety interlock solenoid valve, Kynar, 110V/60Hz
SV-K20 Safety interlock solenoid valve, Kynar, 220V/50Hz
FF-DCV Drain check valve, Teflon, for vacuum drain
DVV-B10 Drain solenoid valve, brass, for vacuum drain 110V/60Hz
DVV-B20 Drain solenoid valve, brass, for vacuum drain 220V/50Hz
DVP-K10 Drain solenoid valve, Kynar, for pressure drain 110V/60Hz
DVP-K20 Drain solenoid valve, Kynar, for pressure drain 220V/50Hz
MG-DVT Drain valve timer
MG-DC Mounting clamps for dryer (specify dryer model)
MG-HB200T Heater blocks for PD-200T, 1 pair
MG-1412-HB Backplate with heater for enclosure 1412
MG-2112-HB Backplate with heater for enclosure 2112
PD-50T-24E 50 tube dryer replacement element, 24″ long, includes o-rings
PD-100T-24E 100 tube dryer replacement element, 24″ long, includes o-rings
PD-200T-24E 200 tube dryer replacement element, 24″ long, includes o-rings
FF-250-E-2.5G Replacement filter element
FF-250-G Replacement glass shell
FF-250-3 Replacement o-ring set, set of 3
AS-200-08-EB Media replacement for ammonia scrubber, bulk supply, 5 fillings
MG-PUMPKIT Pump repair kit, Teflon diaphragm

Perma Pure Dryer App

PP-Apple-App PP-Android-App

All About Nafion

img-tech-naphion-beanshooter

Technical Information

Contact Us Now!

Your Name (required)

Your Email (required)

Your Company & Location (required)

Subject or Your Question