The Portable Version of Perma Pure’s MiniGASS Heated Gas Sampling System
Our Portable Mini-GASS™ systems prepare hot gas sample streams for high performance gas analysis, designed for stack testing and intermittent use. Includes carrying case.
Many gas analyzers suffer performance degradation and maintenance problems due to clogging and corrosion when water or water vapor reaches the equipment. Mini-GASS systems remove water to well below the condensation point, typically providing dew points as low as -25C.
Mini-GASS units offer several options and configurations, including mounting directly on the stack so very little heated line is used. For explosive environments, a Class I, Division II version is available. An automatic drain installed on the filter will remove acid mists. A sample pump can be incorporated to make a completely self-contained system.
Mini-GASS systems are ideal for process and continuous emissions monitoring (CEMS) applications. They are designed to process highly corrosive and difficult samples including gas streams containing high levels of HCl, HF, NOx or SOx.
Features include:
- 28″w x 12″h x 7″d fiberglass enclosure w/transparent cover
- Handle and carrying case
- 1/4″ inlet compression fitting and heat-shrinkable conduit for heated sample line
- PID temperature controller with digital display
- Purge gas flowmeter, pressure regulator and pressure gage
- System ready/alarm outputs
- Corrosion-resistant coalescing filter; borosilicate fiber in Teflon™ binder element 1 µm absolute porosity
- Calibration gas inlet port
- NEMA / Type 4X rated
- CE Mark approved
MiniGASS Intelligent Product Numbering System
|
|
Perma Pure MiniGASS 2812 Spare Parts
ITEM # | Description |
MG-DTC | Digital temperature controller, single channel |
MG-TCS | Thermocouple |
MG-SSR | Solid state relay |
MG-FM | Flow meter, purge gas (0-60 L/min) |
MG-PR | Pressure regulator, purge gas or eductor |
MG-DPS | Differential pressure switch |
MG-PG-0-30 | Pressure gage, purge gas (0-30 PSI) |
MG-VG-0-60 | Vacuum gage, purge eductor (0-30″Hg) |
SV-K10 | Safety interlock solenoid valve, Kynar, 110V/60Hz |
SV-K20 | Safety interlock solenoid valve, Kynar, 220V/50Hz |
FF-DCV | Drain check valve, Teflon, for vacuum drain |
DVV-B10 | Drain solenoid valve, brass, for vacuum drain 110V/60Hz |
DVV-B20 | Drain solenoid valve, brass, for vacuum drain 220V/50Hz |
DVP-K10 | Drain solenoid valve, Kynar, for pressure drain 110V/60Hz |
DVP-K20 | Drain solenoid valve, Kynar, for pressure drain 220V/50Hz |
MG-DVT | Drain valve timer |
MG-DC | Mounting clamps for dryer (specify dryer model) |
MG-HB200T | Heater blocks for PD-200T, 1 pair |
MG-1412-HB | Backplate with heater for enclosure 1412 |
MG-2112-HB | Backplate with heater for enclosure 2112 |
PD-50T-24E | 50 tube dryer replacement element, 24″ long, includes o-rings |
PD-100T-24E | 100 tube dryer replacement element, 24″ long, includes o-rings |
PD-200T-24E | 200 tube dryer replacement element, 24″ long, includes o-rings |
FF-250-E-2.5G | Replacement filter element |
FF-250-G | Replacement glass shell |
FF-250-3 | Replacement o-ring set, set of 3 |
AS-200-08-EB | Media replacement for ammonia scrubber, bulk supply, 5 fillings |
MG-PUMPKIT | Pump repair kit, Teflon diaphragm |